How To Build Your Own Bike- A Detailed Guide

A Step-by-Step Guide to Customizing Your Ride- This cannot get any easier!

We buy and receive free products to review, and may receive commissions from affiliate links. See our disclosure page for details.

So in this article, I want to begin with the “how” part. If you have read any of my other articles you will know that I truly believe the bike is a utilitarian machine. It is easy to work on, fun to customize, and even more, fun to ride around.

Sure there are plenty of carbon fiber and graphene compound frames out there that cost more than your first born but you shouldn’t let that intimidate you.

How To Build Your Own Bike- Steps

The idea of building your own bike is surely exciting, but speaking from experience, you should definitely get the right tools first. You don’t want to be fumbling with the frame and tires not knowing how to fix them together. Here is what you are going to need:


  • Allen Wrench
  • Screwdrivers
  • Torque Wrench
  • Adjustable Wrench
  • Spoke Wrench
  • Chain Tool
  • Bottom Bracket
  • Pedal Wrench
  • Cable Cutters
  • Grease and Lubricants
  • Chain Whip and Cassette Lockring Tool

Don’t be scared of the long list. These tools are only going to make the job simpler! Let’s begin.

Step 1: Get The Frame

Unless you know how to weld and have all the necessary jigs for bike building; the frame is something you will have to buy either new or used. Sometimes the classifieds or your local co-op are good places to start looking for frames.

You need to make a choice on what kind of bike you want to build and buy accordingly. You should look for something your size of course and judging against the past bikes you’ve owned this should be relatively easy.

Besides the size, you want to make sure the frame is not bent, rusted, or broken in any way. When dealing with steel, bending is more likely to be the case, but even then still unlikely. Aluminum and carbon fiber tend to have more catastrophic failures and will be easy to see with the naked eye.

If you can, try to make the bottom bracket threads have not been stripped or damaged as well. This kind of thing can be fixed but it will add unnecessary cost to the project. Many times used bikes will come with a myriad of parts still attached to the frame.

Tip: I would recommend you buy a frame new is the only way to ensure that it has not crashed. For aluminum and carbon frames it is the only way to really know the mileage and age of the bike. Most manufacturers have a frame or frame and fork option on their website store.

Woman on a road bike

Step 2: Find The Fork

Just like with the frame you need to know what kind of fork you want. It should match the type of bike be it road, BMX, mountain, or everything in between. You should know what material is best for how you want to ride and it needs to have the right clearance for the types of tires you want.

Some manufacturers are now doing offset or tapered headsets in which the top race (headtube race) is smaller in outside diameter than the bottom race (crown race). It is critical that you find a fork that is compatible.

In choosing your fork think about the frame material. Carbon fiber is light and strong. It will dampen the hardness of the road beneath you. Aluminum is light and rigid. It can sometimes amplify those bumps in the road but it is cheaper than carbon fiber and most mid to upper-level road bikes are made out of aluminum.

Steel is heavier and suppler than the other two. It is cheaper as well. This is my go-to material for my mountain bike fork. It’s best for touring, fat tire mountain bikes, and family heirloom road bikes. It is going to outlast you.

Tip: If you need rack or fender mounts, you can get them. If you want to run a quill stem make sure you get a threaded fork and headset.

Biking downhill

Step 3: The Headset

Briefly mentioned before, the headset is a set of bearings, cups, and races that connects the fork to the frame. It is what allows your front wheel to turn. The races are pressed down onto the fork, the cups are placed into the holes in the headtube on the frame, and bearings fit into these cups.

Most modern headset bearings are sealed bearings. They are also usually higher quality than unsealed bearings.

Sealed means that the bearing inners and outers are press-fitted around the bearing balls themselves and usually a rubber or plastic seal is placed on top of the bearing balls so you cannot see them when you look at the finished product. The only drawback here is that sealed bearings are much harder to work on and add grease to the life of the headset.

Bearings that are not sealed tend to last a little longer because you can clean and regrease them after every season. My favorite headset brands include Chris King, Phil Woods, Paul Components, and Cane Creek.

Tip: Be sure to keep in mind that if you get a tapered headtube you get a headset that is compatible.

Road bike cyclist

Step 4: The Stem

Sizing and compatibility are also very important here. You need to get a stem that will fit around your steer tube. Modern stems fit down over the steer tube and tighten into place. Often times there will be spacers to raise the height of the stem. The spacers go on top of the headset and then the stem fits down over them.

Then the fork is cut (steer tube is what I use to refer to the part of the fork that is not the actual fork part. It is the long tube of metal the fork is attached to.), and after a star nut is placed inside the steer tube and the headset cap bolts down on top of the stem, sandwiching everything down tight together so your bearings in your headset are flush against their cups.

There is really no particular order to buy these things, most people already have ideas about what kind of bars or stems they want to use and then they buy the matching parts after. There is plenty of variety on the bike market to find what you like and what will be compatible.

Tip: Make sure you get a stem that will also accommodate the size of handlebars you want to use.

Happy road biker

Step 4 ½: The Quill Stem

A quill stem is an older part from a time when forks and headsets were threaded so owners could remove the play in the fork by tightening down the nuts over spacers down onto the fork itself. Then the quill stem would actually fit down inside the steer tube instead of down over the steer tube like a modern stem.

Quill stems often come in an L –shape with the long part of the L going down into the steer tube. There is a long bolt at the top of the stem that connects to a wedge at the bottom.

The more you tighten this bolt the tighter the wedge gets down inside the steer tube holding it into place. I think modern stems and forks are easier to work on but there is a sure classic feel to the quill stem. I have one on my track bike

Road bike handlebars

Step 5: The Handlebars, Shifters, And Brake Levers

The handlebars are very important. They can determine the entire feel of how you interact with your bike. Road bikes traditionally have drop bars, mountain bikes usually have flat bars, and touring bikes have some hybrid in between. The type of bars will determine what kind of shifters and brake levers you have.

Flat bars dictate some kind of trigger shifter and traditional brake lever, whereas road bars might have you using integrated or bar end shifters and road brakes with the hoods for hand placement.

If you are creative enough, your perfect combination is out there and not that difficult for you or a professional mechanic to throw together. This is evidenced by all the drop bar mountain bikes coming out these days.

Bike disc brake

Step 6: The Brakes

There are 3 types of brakes out there. Hub brakes; where the braking mechanism is in the hub like drum brakes or coaster brakes. Disc Brakes use a disc rotor and hydraulic or mechanical calipers. And rim brakes that use a caliper to squeeze the braking surface of your rims. Hub brakes although not super popular can be fun, but you will most likely go with a rim brake or disc brake.

The advantages of a disc brake are that they have significantly more stopping power than a rim brake. Hydraulic disc brakes are also self-adjusting as your pads wear. Disadvantages are that they are more expensive, not UCI approved (meaning if you wanted to do a sanctioned road race you would be disqualified), and in the very rare case with hydraulic disc brakes, prone to catastrophic failure.

I have never heard of a brake line busting but the possibility is always there. Mechanical brakes use a cable which can also potentially snap but that is even more unlikely.

Rim brakes are easy to work on and replace. There are three main models. The regular caliper road bike, light, and compact are what you find on most modern road bikes (read all our road bike reviews here.)

The cantilever brake allows more clearance for wider tires and is a popular choice on cross bikes and touring bikes. The V-brake, linear pull, or side pull brake (all different names for the same thing) is similar to the cantilever in that it gives you more clearance for wider tires but it requires less work.

These were common on all 90’s era mountain bikes and many low-end bikes today. Once you have made that choice you need to make sure that the frame and fork you get is compatible.

I would definitely recommend you make sure you have brake bosses for both V-Brake and Cantilever brakes. Make sure you have disc brake mounts on your fork and stay if you want disc brakes.

You also will need rotor mounts on your hubs if you are going to run disc brakes. Honestly, if you can afford it, just get hydraulic disc brakes, doesn’t matter what kind of bike you are trying for, the stopping power alone is my number one reason.

Road bike wheels

Step 7: Wheels and Tires

Wheels are made up of a hub, a rim, spokes, and nipples. Hubs and their quality will determine how light your wheel is and well it will roll. Inside the hub is a set of bearings sitting over your axle.

The better the bearings the better it rolls. Most companies have low, mid, and high-quality sets. Shimano has Tiagra and Dura-Ace. Sram has rivals and every other company has crazy names for their different sets. Look for something you like.

Check out all our road bike wheel reviews here.

The same goes for rims. Most rims are made of aluminum but carbon is extremely popular with all those people looking to save weight. The important thing to remember for carbon road rims is that traditional brake pads do not work.

They generate too much heat from the friction between the pad and rim and end up melting the resin that holds the carbon fiber together. Get carbon fiber-specific brake pads.

There are also quite a few different spoke materials and styles. Some will be really sturdy to help you carry that extra load. Some are flattened or butted for less material and better wind resistance. Do some research and find what is best for you. I usually go with a 32-hole 3-cross pattern. There are so many different options.

Tires are the thing that touches the road, and riders often forget that. Do some research and get the tire you need for the type of riding you want to do. If you want to run wider tires make sure you have the clearance in your frame and fork.

Tip: Don’t let this be an afterthought. The whole concept of your bike should be in your head when you start buying components.

Road bike group

Step 8: The Seat Post

A 3000-word article could be written about each one of these steps alone, especially the seatpost. First of all, make sure you get the right size that is compatible with the seat tube on your frame. After that, it is a matter of the material. Carbon, steel, and alloy (aluminum alloy usually) are the three main materials but there are others.

Carbon is expensive and hard to repair, but really good at dampening the ruts of the road. Steel will not break, is easy to repair, and is inexpensive comparatively. However, it can be quite a pain in the ass literally.

Alloy is a good in-between for all of the factors mentioned earlier. There is also a suspension seatpost that might be worth looking into if you are interested in a softer ride.

Dropper seat posts are also common on downhill mountain bikes if that is of any interest to you but I suggest you do a little research before you shell out the cash.

Adjusting bike seat

Step 9: The Saddle

The saddle is perhaps the easiest thing to buy that will affect the way you ride. Get something comfortable that you can put some miles into.

Don’t worry about compatibility so much because all saddles interface with the post the same way and sizing is not an issue. Check out this article I did a few weeks back on how to choose your saddle.

Road bike group

Step 10: The Bottom Bracket

This is where things can get tricky depending on your frame. Especially if you picked up that awesome no-name project frame off the classifieds. What is important here is the thread pitch. That means the distance between each thread in the bottom bracket shell. The shell is where the bottom bracket fits into your bike.

The thread pitch must be the same. There are so many different kinds of measurement standards used over the years that this is actually pretty complicated. There is the Japanese industrial standard, ISO, some French and English standards are different, and off course Campagnolo is all kinds of weird.

Once you have determined the thread pitch just buy a compatible bottom bracket that you like. Here you’ll be wanting to get a feel for how light they can be and what kind of bearings they use. The better quality the bearings are, the better your pedal stroke can be.

Road bike gears

Step 10 ½: The Crankset, Gearing

Single, double, triple, and gear inches are things you should be considering. All types of cycling have their preferred gearing. For example, mountain bikes usually have a really large range of gears especially on the low end so riders can climb all of the hills they face.

Road riders usually go with a double in the front and 10-11 speeds in the rear. This is really important because it will determine what you can do on your bike.

I suggest doing some more research on your own because there are many different theories about what kind of gear you need. There are plenty of companies out there making components so you have to make sure that your gearing is compatible with your derailleur (derailer) and your derailleurs are compatible with your shifters.

A quick call to the manufacturer can solve your problems. Do not rely on internet wisdom on issues of compatibility.

Bike tools

Why Should You Build Your Own Bike?

So after all that why would you build your own bike? It is the only way to have complete control of what goes on your bike. Sure, you can add new parts to an already complete bike but you won’t learn as much.

Building a bike will increase your knowledge of the industry, it will increase your knowledge of the mechanics of bicycles, and increase your confidence in yourself. I have done it. It took time and effort, and it was not cheaper than buying a complete bike but it changed the way I think about transportation and it made me want to become a mechanic which I am today.

Here is a beginner guide that might help you a lot through the building process



Tips To Build Your Own Bike

With such an exciting project at hand, it’s really very easy to get carried away but you do want to get the job done, rightly. Here are a few things to keep in mind when building your custom bike.

Keep In Mind Your Riding Style

You definitely want to set your mind on which type of bike you want along with your riding style. I am an adrenaline junkie so I knew I would be riding on the hills more than the roads.

This is why I built myself a mountain bike using a Nukeproof Scout 275 Alloy MTB Frame. You can build a road bike, commuter, or whatever kind of bike, just make sure that it aligns with your riding preferences. This will help you choose the right components.


We have done most of this part but try to search on the different components. Explore the bike shops and see what interests you. If you are going to buy a used frame (which I definitely do not recommend) examine it thoroughly. Make a wise choice.

Set Your Budget

Although it is somewhat cheaper than buying a whole bike, you still need to set a budget. Try to achieve a balance between quality and affordability. You do not want to get up being carried away with the idea because that can cost you some bucks!

Get The Right Tools

As I previously said, having the right tools will make your job much easier. Get the right tools before you start assembling your bike.

Seek Professional Help

If things get too complicated or overwhelming, seek professional help. Most home mechanics can even pay a visit to your garage to help you with the process. Take proper measurements so that you can get a proper bike fit.

You can also visit a custom bike builder or a bike shop that specializes in building custom bikes to get help.


Don’t forget to enjoy the process. Building your dream bike is surely rewarding and that’s what makes the process much more fun!

Your new bike is just a few tweaks away! If you have any questions, hit us up in the comment section below.

Also Read




For the latest content and updates please follow us on Facebook, Twitter and Pinterest.


11 thoughts on “How To Build Your Own Bike- A Detailed Guide”

  1. For hottest information you have to pay a visit world wide web and
    on internet I found this site as a best web page for most up-to-date updates.

  2. I was extremely pleased to discover this site. I want to to
    thank you for ones time due to this wonderful read!!
    I definitely enjoyed every bit of it and I have you bookmarked to
    see new information in your website.

  3. Thanks for all infornation, but If I want to build a bike and start to sell it, what happens?
    I need some permission to do it?
    I need some certification about it?
    If someone can help me I say thanks…

  4. Hello, I live in south florida. I have a unique bicycle frame idea. Can you provide guidance as to what sort of person/place I should seek out to make it?
    Many thanks in advance. Love this site!
    The site below is my own personal business as I do advertising design on the side, and since you requested a website its the only one I have to offer. Have a great one!

    • Hey Jay.
      I also have an idea for a new tyoe of bike but not much technical knowledge to do it alone. I see your post is from 2017. Did you get to find anything since then ?

  5. honestly made me so motivated i use my bike for delievries (work) and i love always playing around with my bikes swapping the seats and tyres around but always wanted to make my own bike but never had confidence on how to but seeing this made my eyes shine and really excited to make my own bike now thanks very much

  6. how do I know whether parts are compatible? e.g. if I buy a frame which fork fits etc. I see a lot of great products but never know if they would fit together in the end

  7. Well, it’s an excellent idea for a biker, and a biker can make his bike by his choice by this process.

    I have some ideas in my mind but can’t understand how to apply this. Know some essential things from your informative article. Thanks for this.

    Hopefully, I can start building a bike soon.


Leave a Comment